Subway Tile Backsplash Kitchen
Subway tile backsplash kitchen – Metro tiles are rectangular-shaped tiles that can be made of any material, including glass. While the normal size of a subway, the tile length is twice the size of the height, new designs allow having these tiles lengths of three to four times its width, and subway tile backsplash kitchen are no exception. These long, thin tiles are usually installed in an offset pattern, which means that the end to be cut tiles to fit at least every second row. Cutting these rectangular glass tiles with precision cutting tools means.
Turn the subway tile backsplash kitchen and use a compass and grease pencil to mark the place where the cut will be made. Always mark and cut glass tiles on the back to prevent chipping or damage to the front side of the tile, where it will be visible after installation. Change the blade on the wet tile saw a glass-tile diamond blade. Normal tile-cutting tools will chip the glass; the additional diamonds on a glass tile blade will help minimize the damage.
Turn on the saw and place the subway tile backsplash kitchen back up on the table. Line up your pencil mark with the knife and push the tile into the blade with your fingertips on both sides, away from the blade. Keep light, constant pressure on the glass as it moves through the leaf, but do not push or exert too much pressure. Allowing the knife to cut until the slices by means of the clean tile.